Ball Valve for HDPE Pipe
At a glance
|
Specification |
Valve body PE100, ball PP/PA, EPDM seal; EN 12201 / GB/T 13663 |
|
Body / material |
Virgin PE100, moulded in one piece |
|
Design pressure |
SDR11 = PN16 (water, 20 C, per ISO 4427-2 / EN 12201-2) |
|
Service conditions |
On/off and maintenance isolation for gas, water supply and industrial piping |
|
Branding |
Logo on the body, packaging to your drawing |
|
Diameter range |
DN20-DN110 |
|
Certification held |
ISO 9001:2015, CE, SGS |
|
Shipping to |
Europe, Middle East, Southeast Asia, Australia, Africa |
|
How it is joined |
Connects to PE pipe by fusion, so there is no elastomer in the pressure boundary |
|
Colour and marking |
Black, UV stabilised (yellow striped PE100 for gas on request) |
|
SDR |
SDR11 |
What to check before ordering
Send us the pipe schedule rather than a part number. Diameter, SDR and design pressure between them fix every dimension that matters on this fitting and remove the sizing errors that come from matching catalogues across different standards.
Where these fittings go
The duties this size range is bought for are on/off and maintenance isolation for gas. Typically that means:
• Pump discharge lines and meter installations
• Isolation points for maintenance on buried mains
• Boundary valves between a utility network and a private supply
• Section valves on distribution networks
• Water supply and industrial piping
What it is made of and what it meets
It is moulded as one piece from prime PE100 compound; regrind never goes into the pressure-bearing wall. The reference standard is Valve body PE100, ball PP/PA, EPDM seal; EN 12201 / GB/T 13663, and because the tooling is in house the same fit is supplied whichever of those standards your specification is written to. The factory holds ISO 9001:2015, CE, SGS; documentation is released with the shipping papers rather than held back for a separate request.
Order terms: MOQ and lead time negotiable per size and order quantity, confirm on inquiry
Matching components
Designed to be welded with HDPE pipe, electrofusion/butt fusion welding machine, butt weld flange or PE end connector.
FAQ
Q: What sizes and pressure class are available?
A: DN20-DN110, SDR11 = PN16 on the PE pipe side.
Q: How does it connect to the pipe?
A: Both ends are weldable to PE100 pipe, so the valve becomes part of the line rather than a bolted-in component. Ask for the end configuration you need - fusion spigot, electrofusion socket or flanged - against the pipe schedule.
Q: What are the body and seal materials?
A: Valve body PE100, ball PP/PA, EPDM seal; EN 12201 / GB/T 13663
Related items
- HDPE Fusion Ball Valve
- HDPE Ball Check Valve
- Standard Port Ball Valve
- Electrofusion tapping saddle - where a valve goes on an existing main
Hot Tags: ball valve for hdpe pipe, hdpe ball valve, pe pipe ball valve, polyethylene ball valve, hdpe pipeline valve, dn 20-dn 110 ball valve for hdpe pipe, Single Diffusion Ball Valve, HDPE Compression Ball Valve, HDPE Fusion Ball Valve, Polyethylene PE Ball Valve, hdpe ball valve, Double Diffusion Ball Valve
You Might Also Like
Send Inquiry