This page is the pricing reference for the Electrofusion Fittings Price List: how a quotation is built up, what moves the unit price, and what we need from you to return a firm number.
How the quotation is built
Prices are quoted per piece, by dn size and wall series, for the quantity and delivery terms on the enquiry. The Electrofusion Fittings ladder runs dn40 to dn315, and every size on it is priced on its own moulding and material cost rather than scaled from a neighbouring size.
| Size band | Wall series | What drives the price |
|---|---|---|
| dn40 - dn63 | SDR11 and SDR17 | short cycle, highest piece count per order |
| dn75 - dn160 | SDR11 and SDR17 | standard production sizes, best lead time |
| dn180 - dn315 | SDR11 and SDR17 | fabricated to order, longer cycle |
What moves the unit price
- Moulding size: the larger the dn, the more material per piece and the longer the cycle., Wall series: SDR11 and SDR17 carry different wall thicknesses and are not interchangeable at the same price., Quantity: piece prices step down at container quantities. and Packing: bulk bags, cartons and palletised export packing are priced separately.
What to send for a firm quote
- The dn size and the SDR of the mating pipe., The quantity per size and the total order value., The destination port and the required Incoterm. and The packing standard you need on arrival.
Ordering information
Send the list above and we return a priced schedule per size, usually within one working day. For the Electrofusion Fittings the size band to quote is dn40 to dn315 in SDR11 and SDR17.
Related pages
Catalogue pages worth reading alongside the Electrofusion Fittings Price List:
-
![Fusion Pipe And Fittings]()
Fusion Pipe And FittingsAn electrofusion tee supplied from the same system as the PE pipes and fittings it joins, so materials, dimensions and fusion parameters stay consistent across the whole installation. Matching the
-
![Union Electrofusion]()
Union ElectrofusionAn electrofusion tee that acts as a one-piece union, joining three pipe ends in a single moulding instead of the separate couplings an improvised branch would need. Because the three sockets arrive
-
![Tee Electrofusion]()
Tee ElectrofusionAn equal-bore electrofusion tee that branches a PE line while keeping the same internal size through all three outlets, so the flow divides evenly with low turbulence. The one-piece tee welds onto
-
![Fitting Electrofusion]()
Fitting ElectrofusionA dependable electrofusion fitting in tee form, pressure-rated and available across the nominal size range, welded in minutes with standard equipment. It brings the durability and simple installation
-
![Electrofusion Tee]()
Electrofusion TeeAn electrofusion tee that gives a pipeline its structural fork — the point where a single run splits into two for feeding both directions or closing a loop. Moulded with smooth internal routing, it
-
![Electrofusion Reducer]()
Electrofusion ReducerProducts Description National standard grade HDPE electric fusion diverter | New material PE100, precision casting Selected high-density polyethylene (HDPE) new raw materials, manufactured with PE100
-
![HDPE Electrofusion Fittings]()
HDPE Electrofusion FittingsElectrofusion fitting range offers a complete HDPE pipe fittings portfolio from DN20 to DN1600, engineered in PE100 with SDR11 and SDR17 series. Each fitting is precision-moulded in a single piece
-
![Electrofusion Gas Fittings]()
Electrofusion Gas FittingsElectrofusion Gas Fittings are made of high-quality HDPE raw materials, which are non-toxic and environmentally friendly. They have excellent chemical corrosion resistance, are suitable for various
-
![Electrofusion HDPE Pipe Fittings]()
Electrofusion HDPE Pipe FittingsA precision-engineered electrofusion fitting range manufactured to controlled moulding tolerances and supplied with documented fusion parameters. Each PE100 fitting carries an integral resistance
-
![Central Plastics Electrofusion Fittings]()
Central Plastics Electrofusion FittingsCentral Plastics Electrofusion Fittings features an electrofusion straight coupler, a precision-moulded PE100 socket designed to join two HDPE pipe ends into one continuous, leak-free run. Available
-
![HDPE Fusion Weld Fittings]()
HDPE Fusion Weld FittingsHDPE Fusion Weld Fittings Electrofusion Reducer are core pipe fittings for connecting pipes of different nominal diameters. The selectable range of pipe diameters covers multiple specifications from
-
![HDPE Tapping Saddle Electrofusion]()
HDPE Tapping Saddle ElectrofusionThe HDPE Tapping Saddle Electrofusion is a saddle-type branch fitting that lets you add a tapped service line onto an existing PE main without cutting the pipe or stopping flow. Electrowelded into
Gregory Samford
Dennis Perez
Mary Talley
Susan Wiley
Maria Davis
Patricia Prowell