The Electrofusion Tapping Tees are ordered against the standard the pipeline was designed to. The standards below are the ones buyers reference most often for Electrofusion Tapping Tee.
Certificates are issued against the standard named on the order, so the standard has to be settled at the enquiry stage.
Standards referenced in PE piping
- ISO 4427: PE piping systems for water supply., DIN 8074 and DIN 8075: PE pipes and fittings, metric series., EN 12201: PE piping systems for water supply, gas and industrial use. and GB/T 13663: PE pipes for water supply, Chinese national standard.
These are design standards for the system, not marks on the unit. A quotation for the Electrofusion Tapping Tee should name which one the line was designed to, alongside the dn20 to dn630 range.
What to include in an enquiry
An enquiry for the Electrofusion Tapping Tee that carries all five items below can be quoted without a round of clarification:
- Type and quantity., dn size and the SDR or wall thickness of the mating pipe., The standard the pipeline was designed to., Destination port and required packing. and Whether certificates and dimensional reports are needed.
Material grade and wall series
The Electrofusion Tapping Tees are supplied in PE100 HDPE. Wall series held are SDR11 and SDR17, and the size range is dn20 to dn630.
| Size band | Wall series | Typical use |
|---|---|---|
| dn20 - dn110 | SDR11 and SDR17 | distribution mains and industrial lines |
| dn125 - dn250 | SDR11 and SDR17 | trunk mains and industrial lines |
| dn280 - dn630 | SDR11 and SDR17 | large bore and project supply |
Documentation
Material certificates and dimensional reports for the Electrofusion Tapping Tees are issued with the shipment when they are requested at the order stage. Third party inspection at the factory before loading is welcome, and the dn20 to dn630 range is measured batch by batch.
Related pages
Other pages in the Electrofusion Tapping Tee section, each covering a different angle of the same product family:
-
![Electrofusion Saddle Tee]()
Electrofusion Saddle TeeElectrofusion Saddle Tee is a type of branch connection pipe fitting used for plastic pipes, suitable for directly leading out branch pipes from the main pipe without cutting the main pipe. It is
-
![EF Tapping Tee]()
EF Tapping TeeThis EF tapping tee lets a PE100 branch be added to an operative water or gas main while the pipeline continues to flow. It combines a fusion saddle with a moulded outlet into one component, so a
-
![Electrofusion Reducing Tee]()
Electrofusion Reducing TeeElectrofusion Reducing Tee is a type of pipe fitting used in plastic pipe systems, suitable for branch connections of pipes of different diameters. It adopts the brand-new high-density polyethylene
-
![HDPE Electrofusion Tee]()
HDPE Electrofusion TeeElectrofusion equal and reducing tee for HDPE gas and water pipelines, DN20-1000mm.
Josie Wood
Dorothy Rossiter
Yvonne Champlin
Frederick Willis
Robert Bryson
Paul Jones
Considered the 'work horse' of a gas distribution system, IPEX EFS tapping tees are both reliable and easy to install. With a polyethylene undersaddle for sizes up to 2" and a user-friendly strap...
Short Description Tap Tees (High Volume) - Electrofusion Options: HDPE Black MDPE Yellow Size: 2" x 2" 3" x 2" 4" x 2" 6" x 2" 8" x 2" 10" x 2" 12" x 2" Add To Cart Additional Information...
Electrofusion Tapping Tees HDPE Electrofusion Tap Tees Fittings are available to meet your needs in compliance with ASTM D2513, F1055, F2897, and when applicable, AWWA C906 product standards....
Jameson IPS Electrofusion Tapping Tee - (6 Options Available) Available Sizes: 16-2-TEE: 2 in. 16-2-TEE-BX : 2 in., Box of 15; 16-4-TEE: 4 in. 16-4-TEE-BX: 4 in., Box of 10; 16-6-TEE: 6 in. 16-6...
Ed Gueldenzoph. Performance Pipe Gas Distribution Sales Manager. Americas. 972-213-5443. gueldem@cpchem.com....
Made in the USA Increasingly important and required in some sectors of the economy, GF Central Plastics products are proudly produced in the USA. Georg Fischer Central Plastics LLC - Branch Office...