The HDPE socket fusion Tees are ordered against the standard the pipeline was designed to. The standards below are the ones buyers reference most often for HDPE socket fusion Tee.
Certificates are issued against the standard named on the order, so the standard has to be settled at the enquiry stage.
Standards referenced in PE piping
- ISO 4427: PE piping systems for water supply., DIN 8074 and DIN 8075: PE pipes and fittings, metric series., EN 12201: PE piping systems for water supply, gas and industrial use. and GB/T 13663: PE pipes for water supply, Chinese national standard.
These are design standards for the system, not marks on the unit. A quotation for the HDPE socket fusion Tee should name which one the line was designed to, alongside the dn40 to dn63 range.
What to include in an enquiry
An enquiry for the HDPE socket fusion Tee that carries all five items below can be quoted without a round of clarification:
- Type and quantity., dn size and the SDR or wall thickness of the mating pipe., The standard the pipeline was designed to., Destination port and required packing. and Whether certificates and dimensional reports are needed.
Material grade and wall series
The HDPE socket fusion Tees are supplied in PE100. Wall series held are SDR11, and the size range is dn40 to dn63.
| Size band | Wall series | Typical use |
|---|---|---|
| dn40 - dn50 | SDR11 | service and house connections |
| dn63 - dn50 | SDR11 | service and house connections |
| dn63 | SDR11 | service and house connections |
Documentation
Material certificates and dimensional reports for the HDPE socket fusion Tees are issued with the shipment when they are requested at the order stage. Third party inspection at the factory before loading is welcome, and the dn40 to dn63 range is measured batch by batch.
Related pages
Other pages in the HDPE socket fusion Tee section, each covering a different angle of the same product family:
-
![HDPE Butt Fusion Tee butt-fusion-reducing-tee]()
HDPE Butt Fusion Tee butt-fusion-reducing-teeHDPE Butt Fusion Tee is made of brand-new high-quality HDPE material, which is corrosion-resistant, impact-resistant, and anti-aging. It has a long service life and excellent hot-melt connection
-
![Butt Fusing Tee 280mm]()
Butt Fusing Tee 280mmButt Fusing Tee 280mm is a made-to-order HDPE branch junction for the non-standard 280mm outside diameter, fabricated to your exact main size, branch size, wall series and angle, with butt-fusion
-
![Hdpe Fittings Tee 500mm]()
Hdpe Fittings Tee 500mmHdpe Fittings Tee 500mm is a large-diameter HDPE branch junction built for heavy transmission mains on a 500mm bore, delivering a full-flow, butt-fused take-off that matches the strength and pressure
-
![Butt Fusion Tee butt-fusion-wye-dimensions]()
Butt Fusion Tee butt-fusion-wye-dimensionsA butt fusion wye — also called a 45° lateral tee — brings a branch line off a PE100 main through a gently angled 45° socket rather than a square cut. The shallower branching angle keeps flow smooth
-
![HDPE Equal Tee Butt Fusion Fittings]()
HDPE Equal Tee Butt Fusion FittingsThe tees are molded from brand-new PE100 resin and certified against the major international standards, so they're safe even for drinking water lines. The joints are made by butt fusion: pipe ends
Karen Valentin
Alicia Hernandez
Rebecca Hicks
Rhonda Garay
Melvin Cato
Jessica Shelton