
Hdpe Fittings Tee 500mm
Equal Tee Dimension Drawing


At 500mm the tee moves infrastructure-scale flow, so dimensional truth and wall integrity matter more than anywhere else. The junction is engineered to split or divert those high flows while holding a uniform bore - no internal steps, no turbulence traps - keeping pumping costs and surge risk low on long trunk routes.
Used to feed district networks, reservoirs, valve chambers and treatment works off a 500mm main. The heavy section limits deflection and withstands the high hoop stress of a large pressurised bore, while the fusion joint holds against thermal movement and soil loading that large-diameter buried lines experience.
Main: 500mm OD, equal or reduced branch
Material: PE100 high-density polyethylene
Wall series: SDR11 / SDR17 supply options
Angles: 90° standard, 45° / custom on request
Delivery: fusion-parameter table + test certificate
Reducing Tee Branch Combinations from dn75 to dn400
A reducing tee lets the branch step down without a separate reducer, which removes two fusion joints and the short spool piece that would otherwise sit between them. The body is moulded in one piece with the branch already at the smaller diameter, so the branch bore tapers inside the fitting and the fusion ends are all faced in the same setting. This schedule covers the combinations we press between dn75 and dn400.
| Size | SDR11 | SDR17 | Size | SDR11 | SDR17 |
|---|---|---|---|---|---|
| dn75 × 32 × 75 | ✓ | - | dn200 × 63 × 200 | ✓ | ✓ |
| dn75 × 40 × 75 | ✓ | - | dn200 × 75 × 200 | ✓ | ✓ |
| dn75 × 50 × 75 | ✓ | - | dn200 × 90 × 200 | ✓ | ✓ |
| dn75 × 63 × 75 | ✓ | - | dn200 × 110 × 200 | ✓ | ✓ |
| dn90 × 32 × 90 | ✓ | ✓ | dn200 × 125 × 200 | ✓ | ✓ |
| dn90 × 40 × 90 | ✓ | ✓ | dn200 × 160 × 200 | ✓ | ✓ |
| dn90 × 50 × 90 | ✓ | ✓ | dn225 × 90 × 225 | ✓ | ✓ |
| dn90 × 63 × 90 | ✓ | ✓ | dn225 × 110 × 225 | ✓ | ✓ |
| dn90 × 75 × 90 | ✓ | ✓ | dn225 × 160 × 225 | ✓ | ✓ |
| dn110 × 32 × 110 | ✓ | ✓ | dn225 × 200 × 225 | ✓ | ✓ |
| dn110 × 40 × 110 | ✓ | ✓ | dn250 × 90 × 250 | ✓ | ✓ |
| dn110 × 50 × 110 | ✓ | ✓ | dn250 × 110 × 250 | ✓ | ✓ |
| dn110 × 63 × 110 | ✓ | ✓ | dn250 × 125 × 250 | ✓ | ✓ |
| dn110 × 75 × 110 | ✓ | ✓ | dn250 × 160 × 250 | ✓ | ✓ |
| dn110 × 90 × 110 | ✓ | ✓ | dn250 × 200 × 250 | ✓ | ✓ |
| dn125 × 63 × 125 | ✓ | ✓ | dn250 × 225 × 250 | ✓ | ✓ |
| dn125 × 75 × 125 | ✓ | ✓ | dn280 × 110 × 280 | ✓ | ✓ |
| dn125 × 90 × 125 | ✓ | ✓ | dn280 × 160 × 280 | ✓ | ✓ |
| dn125 × 110 × 125 | ✓ | ✓ | dn280 × 200 × 280 | ✓ | ✓ |
| dn140 × 110 × 140 | ✓ | ✓ | dn280 × 225 × 280 | ✓ | ✓ |
| dn160 × 32 × 160 | ✓ | ✓ | dn315 × 110 × 315 | ✓ | ✓ |
| dn160 × 40 × 160 | ✓ | ✓ | dn315 × 160 × 315 | ✓ | ✓ |
| dn160 × 50 × 160 | ✓ | ✓ | dn315 × 200 × 315 | ✓ | ✓ |
| dn160 × 63 × 160 | ✓ | ✓ | dn315 × 225 × 315 | ✓ | ✓ |
| dn160 × 75 × 160 | ✓ | ✓ | dn315 × 250 × 315 | ✓ | ✓ |
| dn160 × 90 × 160 | ✓ | ✓ | dn355 × 160 × 355 | ✓ | ✓ |
| dn160 × 110 × 160 | ✓ | ✓ | dn355 × 200 × 355 | ✓ | ✓ |
| dn160 × 125 × 160 | ✓ | ✓ | dn400 × 110 × 400 | ✓ | ✓ |
| dn180 × 110 × 180 | ✓ | ✓ | dn400 × 160 × 400 | ✓ | ✓ |
| dn180 × 160 × 180 | ✓ | ✓ | dn400 × 200 × 400 | ✓ | ✓ |
| dn200 × 40 × 200 | ✓ | ✓ | dn400 × 250 × 400 | ✓ | ✓ |
| dn200 × 50 × 200 | ✓ | ✓ | dn400 × 315 × 400 | ✓ | ✓ |
The run diameter is printed first and the branch diameter second, so dn200 × 90 means a tee that welds into a dn200 line and leaves a dn90 outlet. One run size does not take every branch: the moulds step in standard increments, and where a combination is missing from the schedule it is because no tool was cut for it. In that case the branch is normally made up from an equal tee plus a reducer, which costs one extra joint. The dn500 and larger bodies in this family are fabricated rather than moulded and are quoted to the line schedule. For the equal branch see the butt fusion tee page, and the specifications page for the full list.
Every Hdpe Fittings Tee 500mm we ship comes from our own injection lines and is tested in a CNAS-accredited laboratory before despatch. Learn about Qingfa Industry.
Hot Tags: Hdpe Fittings Tee 500mm, Hdpe Fittings Tee 500mm SDR11/SDR17, PE100 hdpe fittings tee 500mm, hdpe fittings tee 500mm supplier, HDPE End Cap, End Cap HDPE Pipe, End Cap HDPE, PE PiPE End Cap, Electrofusion Test Cap, HDPE PiPE End Cap
You Might Also Like
Send Inquiry














