Coupler Electrofusion
Field-proven electrofusion coupler for dependable PE joints
The electrofusion coupler is a workhorse fitting for contractors joining PE pipe in the field, delivering a fusion bond rated for decades of water and gas service.
Built for consistent, worry-free field welds
Its embedded heating wires are tuned to deliver a fast, even melt, while visible fusion indicators on the body confirm the weld has completed. This built-in feedback removes guesswork and gives crews confidence on every joint, even under variable weather.
Key features
Fast uniform melt - embedded wires heat the full socket circumference quickly.
Visible weld indicators - confirm complete fusion at a glance.
Stable contact pins - reduce electrical contact errors during welding.
Cyclic-load tolerant - survives pressure surges and repeated thermal cycles.
Made for demanding site conditions
Whether assembling a new municipal main or patching an existing line, the coupler retains its rated strength under ground settlement and soil movement, keeping the network leaktight season after season.
Applications
Municipal water supply and wastewater collection
Industrial process and cooling water loops
Trenchless and open-cut repair work
Leak remediation without cutting the whole line
Installation note
Ensure clean, scraped pipe, slide both ends to the depth marks, connect the welder leads, and observe the fusion indicators before allowing the recommended cooldown.
Coupler Coverage by Wall Series
The electrofusion coupler is the only fitting in the range with no branch, no bend and no change of bore, so the wall series is the single variable that decides which body fits which pipe. Listing the range by series rather than in running order makes it straightforward to check whether a line laid in one class can be jointed with this coupler end to end. Numbers in the list are nominal PE outside diameters in millimetres.
| Wall series (SDR) | Sizes moulded |
|---|---|
| ✓ | dn20, dn25, ✓, dn32, dn40, ✓, dn50, ✓, dn63, ✓, dn75, dn90, ✓, dn110, ✓, dn125, ✓ |
| - | ✓, ✓, ✓ |
| dn140 | - |
| dn160 | - |
| dn180 | - |
| dn200 | - |
| dn225 | - |
| dn250 | - |
| dn280 | - |
| dn315 | - |
| dn355 | ✓ |
| dn400 | - |
The heavy series runs unbroken from dn20 to dn400, and the light series opens at dn110 and continues to the same top end, so a distribution main is covered by this family from the point where it reaches dn110 upward. Below that the light-series line is jointed with a reducing body or stepped up in class at the joint. Because the socket is cut to the outside diameter and wall of the pipe, a coupler in one series will not close a pipe of another even at the same nominal size, and the two are stocked as separate items. The running-order view of the same family is on the coupler electrofusion page and the specifications page.
Qingfa Industry manufactures Coupler Electrofusion alongside the full PE100 range of electrofusion, butt fusion and socket fusion fittings. Established in 1999, the company holds CE, ISO 9001 and WRAS approvals. Explore our PE100 fitting production.
Hot Tags: Coupler Electrofusion, Coupler Electrofusion dn20-dn400, PE100 coupler electrofusion, coupler electrofusion supplier, HDPE End Cap, End Cap HDPE Pipe, End Cap HDPE, PE PiPE End Cap, Electrofusion Test Cap, HDPE PiPE End Cap
You Might Also Like
Send Inquiry
















