HDPE Gas Fittings Price List 2026 (RMB, Per Piece)
Nov 12, 2026
Leave a message
Every PE100 gas fitting QINGFA moulds has a number on this sheet: 823 of them, in RMB, per piece, from the price list that took effect on 1 July 2026. It is the same document our sales desk quotes from, which is the reason it is worth reading before you send an enquiry.
Suppliers usually keep this page internal, on the theory that a published number hands the negotiation to the buyer. The enquiries we actually receive are rarely about the number itself. They are about whether the number still holds at four thousand pieces, at DN500, delivered to a site that needs the pipe jointed in six weeks. That answer is not on any price list, ours included.
The figures below are list prices. Volume, size mix and delivery schedule each move them, and they move them downward. Send a bill of materials with quantities and we will quote against it - the arithmetic is set out under how the discount works.
Quote requests go to our enquiry desk, or straight to julie@zjqingfa.com. Expect a priced schedule back within one working day.
Rather price a bill of quantities offline? Download this sheet as a PDF (118 KB, 14 pages, original list, discount note on every page), or as an Excel workbook (359 KB). The water series and both other formats sit in the download centre.
What is in this list
Five families, 823 price points. Everything is PE100 from a certified compound; the SDR 9 items that appear in the butt-fusion section are marked in the group heading, because they are a different wall class and a different price.
| Family | Products covered | Size range | Prices |
|---|---|---|---|
| Electrofusion fittings | couplers, reducers, reducing tees, equal tees, 45 and 90 degree elbows, end caps, stub ends, saddle couplers, saddle branches, saddle plugs | DN20 - DN630 moulded, DN1200 on the coupler line | 266 |
| Butt-fusion fittings | reducers, reducing tees, equal tees, cross tees, 45 and 90 degree elbows, end caps, stub ends, flange plates, condensate collectors | DN40 - DN1200 | 324 |
| PE ball valves | standard port, single vent, double vent, plus stems, sleeves, dust caps and warning tape | Φ32 - Φ355 | 51 |
| Steel-plastic transition | straight SDR 11 and SDR 17, bent 1.1 m and 1.5 m steel length, ductile-iron threaded | DN25 - PE400 | 155 |
| Electrofusion saddles, new type | saddle coupler, saddle branch | DN63 - DN315 | 27 |
Every family name links down to its section. Each section opens with the sizes that are standard mouldings and the ones that are quoted against a delivery date.
How to read the numbers
Four conventions run through every table. They are obvious once stated and expensive when misunderstood, because a wrong SDR or a missing asterisk turns a correct price into a wrong order.
Two SDR columns are two wall classes, not two products
SDR 11 and SDR 17 use the same coupler body, moulded to different wall thicknesses to match the pipe they will be fused to. A DN110 coupler in SDR 11 takes a 10.0 mm wall; the SDR 17 version of the same coupler takes 6.6 mm. The price difference between the two columns is the material and cycle time between those walls, not a quality difference.
A blank cell means the item exists but is not held as a standard moulding in that class. It is made to order, and we quote it rather than list it, because the cost of a short run is not the cost of the catalogue item plus a margin.
DN is the outside diameter, and Φ is used only on valves
PE pipe is designated by outside diameter, so DN110 means 110 mm OD whatever the wall. One coupler size therefore covers exactly one pipe size, and an order written in inches has to be converted before it can be priced - 4 inch is not DN100, it is DN110, and the two do not interchange.
Φ appears in the ball valve and valve accessory tables, where the dimension refers to the valve body end rather than the pipe. Φ63 is the same nominal size as DN63, quoted the way the valve trade quotes it.
An asterisk means the steel end can be threaded
In the steel-plastic section, items marked * can be supplied with a BSP or NPT male thread on the steel side. The price already covers the thread; what changes is lead time, because threading is a second operation after the transition body is moulded.
On request means machined, not moulded
Two entries carry that note: flange plates and the extended protective sleeve. Both are cut from plate or extruded stock per order. There is no sensible unit price for them because the weight and the drilling pattern decide the cost.
Why the curve bends
A coupler costs 9 at DN20 and 12877 at DN1200. That is a factor of roughly 1,400 for a diameter increase of 60. Nothing about the material explains it, because the material only grows with the square of diameter while the price grows with something closer to the cube.
Four things do the work, and they are worth knowing because each one is a lever in a negotiation.
- Cavity count and cycle time. Small couplers run in multi-cavity tools with a short cooling cycle. Above DN315 the tool is single cavity, the cycle is measured in minutes, and one machine makes a few dozen parts a shift.
- Wall class. SDR 17 uses roughly two thirds of the material of SDR 11 at the same diameter, and cools faster, so the SDR 17 column is consistently lower for the same size.
- Assembly labour. Most tees and 45 degree elbows above DN315 are not moulded as one piece. They are fabricated from moulded segments and fused, and the fusing is hand work that has to be tested.
- Metal content. Steel-plastic transitions and threaded socket fittings carry a steel or brass insert. Those prices follow the metal market, so they move between editions of the list faster than the all-plastic items do.
Electrofusion fittings, SDR 11 and SDR 17
The core of the gas range: couplers, reducers, tees, elbows, end caps, stub ends and the older saddle coupler line. Sizes from DN20 to DN630 are standard mouldings; DN710 to DN1200 exist on the coupler line and are quoted against a delivery date rather than held in stock.
Couplers, reducers, saddle couplers and flange adaptors
Electrofusion Coupler
| Size | SDR 11 | SDR 17 |
|---|---|---|
| DN20 | 9 | |
| DN25 | 9 | |
| DN32 | 10.62 | |
| DN40 | 11.26 | |
| DN50 | 12.66 | |
| DN63 | 15.46 | |
| DN75 | 26.22 | |
| DN90 | 29 | |
| DN110 | 38.24 | 30.64 |
| DN125 | 56.72 | |
| DN140 | 78.36 | |
| DN160 | 78.7 | 60.08 |
| DN180 | 144.74 | |
| DN200 | 155.9 | 91.7 |
| DN225 | 252.1 | 142.2 |
| DN250 | 265.5 | 173.8 |
| DN280 | 371.7 | |
| DN315 | 429.6 | 316.2 |
| DN355 | 752.5 | 525.9 |
| DN400 | 1012.9 | 754.5 |
| DN450 | 1330 | 839 |
| DN500 | 1573 | 1040 |
| DN560 | 1969 | 1407 |
| DN630 | 2611 | 1720 |
| DN710 | 3406 | 2620 |
| DN800 | 4516 | 3311 |
| DN900 | 4621 | |
| DN1000 | 6540 | |
| DN1200 | 12877 | 9914 |
Electrofusion Saddle Coupler
| Size | SDR 11 |
|---|---|
| DN63x32 | 80.52 |
| DN90x63 | 113.32 |
| DN110x63 | 157.38 |
| DN160x63 | 220.26 |
| DN200x63 | 298.52 |
| DN200x90 | 302.88 |
| DN250x63 | 437.56 |
| DN250x90 | 441.52 |
| DN250x110 | 445.5 |
| DN315x63 | 455.28 |
| DN315x90 | 465.18 |
| DN315x110 | 474.48 |
Electrofusion Reducer
| Size | SDR 11 |
|---|---|
| DN32x25 | 13.54 |
| DN40x25 | 15.58 |
| DN40x32 | 16.48 |
| DN50x25 | 18.3 |
| DN50x32 | 18.3 |
| DN50x40 | 18.78 |
| DN63x32 | 22.42 |
| DN63x40 | 22.9 |
| DN63x50 | 26.72 |
| DN75x40 | 36.92 |
| DN75x50 | 32.08 |
| DN75x63 | 33.78 |
| DN90x50 | 38.84 |
| DN90x63 | 38.84 |
| DN90x75 | 53.8 |
| DN110x50 | 49 |
| DN110x63 | 58.8 |
| DN110x75 | 61.74 |
| DN110x90 | 62.1 |
| DN125x110 | 103.62 |
| DN160x90 | 107.64 |
| DN160x110 | 114.74 |
| DN160x125 | 135.12 |
| DN200x90 | 188.8 |
| DN200x110 | 224.7 |
| DN200x160 | 236.7 |
| DN225x110 | 236.4 |
| DN225x160 | 236.7 |
| DN225x200 | 236.7 |
| DN250x110 | 278.7 |
| DN250x160 | 325.9 |
| DN250x200 | 332.5 |
| DN250x225 | 332.5 |
| DN315x110 | 406.7 |
| DN315x160 | 418.5 |
| DN315x200 | 587.5 |
| DN315x225 | 658.7 |
| DN315x250 | 587.5 |
| DN400x250 | 786.6 |
| DN400x315 | 826.2 |
| DN450x315 | 1085 |
| DN450x400 | 1124 |
EF Stub End (Flange Adaptor)
| Size | SDR 11 |
|---|---|
| DN50 | 15.5 |
| DN63 | 18.18 |
| DN75 | 25 |
| DN90 | 31.26 |
| DN110 | 43.06 |
| DN125 | 56.74 |
| DN160 | 87.3 |
| DN200 | 131.3 |
| DN250 | 211.3 |
| DN315 | 324.7 |
| DN400 | 806.1 |
Reducing tees and end caps
Electrofusion Reducing Tee
| Size | SDR 11 |
|---|---|
| DN25x20x25 | 15.02 |
| DN32x20x32 | 16.2 |
| DN32x25x32 | 21.18 |
| DN40x20x40 | 18.7 |
| DN40x25x40 | 22.44 |
| DN40x32x40 | 22.44 |
| DN50x25x50 | 27.24 |
| DN50x32x50 | 28 |
| DN50x40x50 | 28.58 |
| DN63x25x63 | 30.04 |
| DN63x32x63 | 30.42 |
| DN63x40x63 | 30.64 |
| DN63x50x63 | 31.2 |
| DN75x32x75 | 44.36 |
| DN75x40x75 | 45.06 |
| DN75x50x75 | 46.36 |
| DN75x63x75 | 47.12 |
| DN90x32x90 | 44.96 |
| DN90x40x90 | 45.94 |
| DN90x50x90 | 47.5 |
| DN90x63x90 | 48.92 |
| DN90x75x90 | 50.22 |
| DN110x32x110 | 71.44 |
| DN110x40x110 | 71.66 |
| DN110x50x110 | 72.24 |
| DN110x63x110 | 72.48 |
| DN110x75x110 | 72.48 |
| DN110x90x110 | 74.26 |
| DN125x90x125 | 108.76 |
| DN125x110x125 | 108.76 |
| DN160x50x160 | 131.2 |
| DN160x63x160 | 131.2 |
| DN160x75x160 | 140.26 |
| DN160x90x160 | 142.52 |
| DN160x110x160 | 154.98 |
| DN200x63x200 | 301.9 |
| DN200x75x200 | 301.9 |
| DN200x90x200 | 315.2 |
| DN200x110x200 | 324.6 |
| DN200x160x200 | 331.2 |
| DN225x110x225 | 324.6 |
| DN225x160x225 | 359.4 |
| DN225x200x225 | 407.3 |
Electrofusion Reducing Tee
| Size | SDR 11 | SDR 17 |
|---|---|---|
| DN250x90x250 | 476.2 | |
| DN250x110x250 | 492.3 | |
| DN250x160x250 | 525.2 | |
| DN250x200x250 | 532.7 | |
| DN315x110x315 | 1049.4 | |
| DN315x160x315 | 1055.4 | |
| DN315x200x315 | 1078.8 | |
| DN315x250x315 | 1114.6 | |
| DN355x200x355 | 1206 | |
| DN355x250x355 | 1223.6 | |
| DN355x315x355 | 1434.9 | |
| DN400x200x400 | 1349.9 | |
| DN400x250x400 | 1509.9 | |
| DN400x315x400 | 1640.7 | |
| DN450x160x450 | 2128 | |
| DN450x250x450 | 2496 | 1622 |
| DN450x315x450 | 2985 | 1715 |
| DN450x400x450 | 2103 | |
| DN500x200x500 | 3170 | |
| DN500x315x500 | 3838 | 2665 |
| DN500x400x500 | 4322 | 2926 |
| DN500x450x500 | 3154 | |
| DN560x400x560 | 3951 | |
| DN560x450x560 | 4183 | |
| DN560x500x560 | 4436 | |
| DN630x315x630 | 5201 | |
| DN630x400x630 | 6400 | 4384 |
| DN630x450x630 | 4718 | |
| DN630x500x630 | 7378 | 4995 |
| DN710x500x710 | 8923 | |
| DN710x630x710 | 10301 |
Electrofusion End Cap
| Size | SDR 11 |
|---|---|
| DN40 | 17.2 |
| DN50 | 17.2 |
| DN63 | 18.6 |
| DN75 | 25.66 |
| DN90 | 29 |
| DN110 | 42.64 |
| DN160 | 96.9 |
| DN200 | 161.7 |
| DN225 | 193 |
| DN250 | 234.3 |
| DN315 | 407.6 |
Elbows, equal tees and saddle branches
Electrofusion 90° Elbow
| Size | SDR 11 | SDR 17 |
|---|---|---|
| DN25 | 14.66 | |
| DN32 | 15.84 | |
| DN40 | 19.66 | |
| DN50 | 25.08 | |
| DN63 | 31.26 | |
| DN75 | 44.7 | |
| DN90 | 47.4 | |
| DN110 | 66.08 | 43.04 |
| DN125 | 106.32 | |
| DN160 | 141.3 | 102.54 |
| DN200 | 251.2 | 186.7 |
| DN225 | 577.6 | 288.8 |
| DN250 | 595.7 | 364.9 |
| DN315 | 901.5 | 654.9 |
| DN355 | 1346.6 | 1346.6 |
| DN400 | 1656.2 | 1656.2 |
| DN450 | 2886 | 2886 |
| DN500 | 3691 | 3691 |
| DN560 | 5144 | |
| DN630 | 6526 | 4423 |
| DN710 | 8072 | |
| DN800 | 13284 | |
| DN900 | 15450 |
Electrofusion Equal Tee
| Size | SDR 11 | SDR 17 |
|---|---|---|
| DN25 | 12.88 | |
| DN32 | 15.76 | |
| DN40 | 20.98 | |
| DN50 | 25.48 | |
| DN63 | 31.86 | |
| DN75 | 47.74 | |
| DN90 | 53.1 | |
| DN110 | 79.44 | 57.1 |
| DN125 | 130.48 | |
| DN160 | 196.1 | 133.78 |
| DN200 | 368.3 | 261.4 |
| DN225 | 438.2 | 343.5 |
| DN250 | 565.4 | 454.4 |
| DN315 | 1370.4 | 768 |
| DN355 | 1680.5 | 1569.9 |
| DN400 | 1999.5 | 1999.5 |
| DN450 | 3310 | 2163 |
| DN500 | 5162 | 3387 |
| DN560 | 6140 | |
| DN630 | 7060 | 5505 |
| DN710 | 12501 |
Electrofusion 45° Elbow
| Size | SDR 11 | SDR 17 |
|---|---|---|
| DN25 | 14.44 | |
| DN32 | 17.22 | |
| DN40 | 21.38 | |
| DN50 | 21.38 | |
| DN63 | 31.04 | |
| DN75 | 45.94 | |
| DN90 | 54.36 | |
| DN110 | 66.52 | 39.48 |
| DN125 | 82.26 | |
| DN160 | 128.34 | 83.16 |
| DN200 | 219.4 | 154 |
| DN225 | 350.2 | 203.1 |
| DN250 | 413.1 | 300.9 |
| DN315 | 768.4 | 464.8 |
| DN355 | 1076.2 | 1001.1 |
| DN400 | 1451.1 | 1334 |
| DN450 | 2106 | 2106 |
| DN500 | 2867 | 2867 |
| DN560 | 3390 | |
| DN630 | 4765 | 4192 |
| DN710 | 5847 | |
| DN800 | 8273 | |
| DN900 | 11407 |
Electrofusion Saddle Branch
| Size | SDR 11 |
|---|---|
| DN63x32 | 134.8 |
| DN90x50 | 423.48 |
| DN90x63 | 456.74 |
| DN110x63 | 502.56 |
| DN160x63 | 549.6 |
| DN200x63 | 741.6 |
| DN200x90 | 773.88 |
| DN250x63 | 1033.2 |
| DN250x90 | 1033.78 |
| DN250x110 | 1030.4 |
| DN315x63 | 1050.4 |
| DN315x90 | 1050.98 |
| DN315x110 | 1047.66 |
Electrofusion Saddle Plug
| Size | SDR 11 |
|---|---|
| DN63 | 80.34 |
| DN90 | 131.4 |
| DN110 | 149.82 |
| DN160 | 188.08 |
| DN200 | 218.12 |
| DN250 | 307.38 |
| DN315 | 366.02 |
Butt-fusion fittings, SDR 11 and SDR 17
Butt-fusion spigot fittings, priced per piece. The large sizes are the ones buyers compare most often, so a note on what is actually being compared: a DN800 equal tee at 15300 is a fabricated part made from moulded segments, not a single moulding, and the price includes the fusion and the dimensional check but not third-party radiography.
Reducers
Butt-fusion Reducer
| Size | SDR 11 | SDR 17 |
|---|---|---|
| DN50x20 | 6.16 | |
| DN50x25 | 6.32 | |
| DN50x32 | 6.44 | |
| DN50x40 | 6.78 | |
| DN63x25 | 8.1 | |
| DN63x32 | 8.1 | |
| DN63x40 | 8.9 | |
| DN63x50 | 9.22 | |
| DN75x32 | 12.78 | |
| DN75x40 | 13.5 | |
| DN75x50 | 13.8 | |
| DN75x63 | 18.64 | |
| DN90x32 | 20.54 | 20.54 |
| DN90x40 | 20.94 | 20.94 |
| DN90x50 | 21.64 | 21.64 |
| DN90x63 | 22.32 | 22.32 |
| DN90x75 | 23.86 | 23.86 |
| DN110x40 | 27.16 | 27.16 |
| DN110x50 | 27.2 | 27.2 |
| DN110x63 | 27.84 | 27.84 |
| DN110x75 | 28.78 | 28.62 |
| DN110x90 | 31.64 | 29.8 |
| DN125x63 | 42.14 | 42.14 |
| DN125x75 | 43.7 | 42.98 |
| DN125x90 | 43.48 | 42.76 |
| DN125x110 | 50 | 47.78 |
| DN140x110 | 57.66 | 54.48 |
| DN160x50 | 63.46 | 62.4 |
| DN160x63 | 70.52 | 67.38 |
| DN160x75 | 65.1 | 63.8 |
| DN160x90 | 66.76 | 62.1 |
| DN160x110 | 70.02 | 64.58 |
| DN160x125 | 71.8 | 66.08 |
| DN160x140 | 77.18 | 70.28 |
| DN180x160 | 110.32 | 101.76 |
| DN200x63 | 110 | 104.6 |
| DN200x75 | 110.4 | 104.3 |
| DN200x90 | 112.8 | 109.2 |
| DN200x110 | 120.5 | 112.8 |
Butt-fusion Reducer
| Size | SDR 11 | SDR 17 |
|---|---|---|
| DN200x125 | 122.3 | 114.7 |
| DN200x160 | 136 | 124.5 |
| DN200x180 | 142.1 | 124 |
| DN225x110 | 161.5 | 142.7 |
| DN225x125 | 160.3 | 145.5 |
| DN225x160 | 173.3 | 153.4 |
| DN225x200 | 190.4 | 173.3 |
| DN250x90 | 157.9 | 149.1 |
| DN250x110 | 178.9 | 167.4 |
| DN250x125 | 180.4 | 165.2 |
| DN250x160 | 195 | 170.7 |
| DN250x200 | 208.8 | 183.8 |
| DN250x225 | 217.9 | 194.9 |
| DN280x200 | 265.5 | 221.9 |
| DN280x250 | 309.2 | 261.4 |
| DN315x90 | 307.6 | 268.6 |
| DN315x110 | 307.6 | 268.6 |
| DN315x160 | 309 | 282.4 |
| DN315x200 | 333.5 | 293.5 |
| DN315x225 | 364.8 | 307.3 |
| DN315x250 | 381.2 | 370.9 |
| DN315x280 | 418.5 | 344.4 |
| DN355x250 | 524.5 | 450.4 |
| DN355x315 | 564.4 | 547.1 |
| DN400x160 | 505.5 | 437 |
| DN400x200 | 518.1 | 439.1 |
| DN400x250 | 551.7 | 461.6 |
| DN400x315 | 599.3 | 485 |
| DN400x355 | 638 | 517.5 |
| DN450x250 | 843 | 688 |
| DN450x315 | 864 | 725 |
| DN450x400 | 921 | 753 |
| DN500x315 | 1156 | 955 |
| DN500x400 | 1030 | 855 |
| DN500x450 | 1189 | 901 |
| DN630x400 | 1836 | 1434 |
| DN630x450 | 1895 | 1449 |
| DN630x500 | 1935 | 1503 |
Reducing tees
Butt-fusion Reducing Tee
| Size | SDR 11 | SDR 17 |
|---|---|---|
| DN50x32x50 | 16.62 | |
| DN50x40x50 | 16.62 | |
| DN63x25x63 | 16.8 | |
| DN63x32x63 | 17 | |
| DN63x40x63 | 17 | |
| DN63x50x63 | 17 | |
| DN75x32x75 | 23.34 | |
| DN75x40x75 | 24.04 | |
| DN75x50x75 | 24.94 | |
| DN75x63x75 | 27.52 | |
| DN90x25x90 | 29.6 | 29.6 |
| DN90x32x90 | 30.42 | 30.42 |
| DN90x40x90 | 31.28 | 31.28 |
| DN90x50x90 | 33.88 | 33.88 |
| DN90x63x90 | 36.52 | 36.52 |
| DN90x75x90 | 40.98 | 40.98 |
| DN110x32x110 | 45.64 | 42.62 |
| DN110x40x110 | 47.62 | 46.66 |
| DN110x50x110 | 48.9 | 47.72 |
| DN110x63x110 | 54.08 | 52.84 |
| DN110x75x110 | 56 | 55.34 |
| DN110x90x110 | 62.72 | 61.98 |
| DN125x63x125 | 104.84 | 92.6 |
| DN125x75x125 | 107.5 | 95.98 |
| DN125x90x125 | 105.44 | 95.46 |
| DN125x110x125 | 109.36 | 105.62 |
| DN140x110x140 | 129.44 | 112.64 |
| DN160x32x160 | 120.76 | 110.62 |
| DN160x40x160 | 120.28 | 111.82 |
| DN160x50x160 | 121.3 | 113.1 |
| DN160x63x160 | 128.06 | 113.48 |
| DN160x75x160 | 130.88 | 113.48 |
| DN160x90x160 | 138.84 | 114.34 |
| DN160x110x160 | 150.36 | 119.7 |
| DN160x125x160 | 161.72 | 145.18 |
| DN180x110x180 | 211.58 | 202.14 |
| DN180x160x180 | 233.08 | 219.38 |
| DN200x40x200 | 183.7 | 179.3 |
| DN200x50x200 | 194 | 191.1 |
| DN200x63x200 | 199.5 | 163.9 |
| DN200x75x200 | 211.7 | 205.4 |
| DN200x90x200 | 218.3 | 175.9 |
| DN200x110x200 | 251.1 | 193.6 |
| DN200x125x200 | 259.2 | 246.4 |
Butt-fusion Reducing Tee
| Size | SDR 11 | SDR 17 |
|---|---|---|
| DN200x160x200 | 271.1 | 225.1 |
| DN225x90x225 | 333.2 | 317.3 |
| DN225x110x225 | 338.7 | 318.4 |
| DN225x160x225 | 363.9 | 331.1 |
| DN225x200x225 | 410.9 | 401 |
| DN250x90x250 | 399.1 | 321.9 |
| DN250x110x250 | 419.8 | 335.3 |
| DN250x125x250 | 439.5 | 412.1 |
| DN250x160x250 | 480.6 | 379.2 |
| DN250x200x250 | 528.8 | 419 |
| DN250x225x250 | 573.5 | 486.4 |
| DN280x110x280 | 514.2 | 445 |
| DN280x160x280 | 587.2 | 458.2 |
| DN280x200x280 | 659.8 | 575.1 |
| DN280x225x280 | 716.8 | 589.7 |
| DN315x110x315 | 680 | 546.3 |
| DN315x160x315 | 773.9 | 618.3 |
| DN315x200x315 | 835.2 | 675.1 |
| DN315x225x315 | 896.8 | 713.8 |
| DN315x250x315 | 951.3 | 755.7 |
| DN355x160x355 | 940 | 749 |
| DN355x200x355 | 965.3 | 771 |
| DN355x250x355 | 1196.3 | 981.8 |
| DN355x315x355 | 1362.7 | 1100.8 |
| DN400x110x400 | 1148.1 | 902.9 |
| DN400x160x400 | 1157.9 | 907.2 |
| DN400x200x400 | 1184.8 | 926.2 |
| DN400x250x400 | 1396.2 | 1096.5 |
| DN400x315x400 | 1492.4 | 1140.7 |
| DN450x250x450 | 2081 | 1631 |
| DN450x315x450 | 2335 | 1803 |
| DN450x400x450 | 2692 | 2040 |
| DN500x315x500 | 2623 | 2183 |
| DN500x400x500 | 2968 | 2407 |
| DN500x450x500 | 3255 | 2654 |
| DN630x400x630 | 4711 | 3593 |
| DN630x450x630 | 5032 | 3811 |
| DN630x500x630 | 5380 | 4181 |
| DN710x400x710 | 6406 | 5324 |
| DN710x500x710 | 7258 | 5992 |
| DN710x630x710 | 9896 | 6829 |
| DN800x500x800 | 11221 | 8475 |
| DN800x630x800 | 14085 | 11101 |
| DN800x710x800 | 15775 | 11280 |
45 and 90 degree elbows
Butt-fusion 45° Elbow
| Size | SDR 11 | SDR 17 |
|---|---|---|
| DN50 | 11.8 | |
| DN63 | 17.64 | |
| DN75 | 19.94 | |
| DN90 | 29.6 | 29.6 |
| DN110 | 42.7 | 41.14 |
| DN125 | 71.74 | 68.12 |
| DN140 | 76.66 | 76.66 |
| DN160 | 122.1 | 97.3 |
| DN180 | 150.16 | 142.36 |
| DN200 | 198.5 | 159.2 |
| DN225 | 258.4 | 207 |
| DN250 | 371 | 299.8 |
| DN280 | 519 | 405.3 |
| DN315 | 734.5 | 585.4 |
| DN355 | 966 | 768.6 |
| DN400 | 1195.2 | 915.9 |
| DN450 | 1544 | 1228 |
| DN500 | 1972 | 1617 |
| DN560 | 2613 | 2089 |
| DN630 | 3549 | 2697 |
| DN710 | 5314 | 3651 |
| DN800 | 6991 | 4848 |
| DN900 | 11348 | 8316 |
| DN1000 | 14227 | 8659 |
| DN450 (long version) | 1904 | 1341 |
| DN500 (long version) | 2308 | 1783 |
| DN560 (long version) | 2931 | 2507 |
| DN630 (long version) | 4131 | 3118 |
Butt-fusion 90° Elbow
| Size | SDR 11 | SDR 17 |
|---|---|---|
| DN20 | 3.48 | |
| DN25 | 3.98 | |
| DN32 | 4.68 | |
| DN40 | 7.36 | |
| DN50 | 10.94 | |
| DN63 | 14.28 | |
| DN75 | 26.62 | 25.48 |
| DN90 | 33.38 | 31.82 |
| DN110 | 50.58 | 48.46 |
| DN125 | 96.2 | 82.44 |
| DN140 | 103.34 | 85.74 |
| DN160 | 146.26 | 112.7 |
| DN180 | 196.58 | 165.98 |
| DN200 | 280.2 | 237.5 |
| DN225 | 388.6 | 308.9 |
| DN250 | 521.3 | 427 |
| DN280 | 677.1 | 556.1 |
| DN315 | 1006.9 | 781.3 |
| DN355 | 1231.5 | 944.9 |
| DN400 | 1544.1 | 1275.1 |
| DN450 | 2284 | 1748 |
| DN500 | 3001 | 2366 |
| DN560 | 3722 | 2910 |
| DN630 | 5197 | 4047 |
| DN710 | 7275 | 5472 |
| DN800 | 9517 | 7449 |
| DN900 | 15780 | 12960 |
| DN1000 | 20788 | 15615 |
| DN450 (long version) | 2046 | |
| DN500 (long version) | 2622 | |
| DN560 (long version) | 3391 | |
| DN630 (long version) | 4584 | |
| DN640 (long version) | 4783 |
Stub ends, cross tees, end caps and flange plates
Stub End
| Size | SDR 11 | SDR 17 |
|---|---|---|
| DN40 | 11 | |
| DN50 | 12.78 | |
| DN63 | 12.8 | |
| DN75 | 18.72 | 18.72 |
| DN90 | 22.18 | 20.28 |
| DN110 | 33 | 30.66 |
| DN125 | 46.08 | 42.58 |
| DN140 | 57.8 | 51.7 |
| DN160 | 81.84 | 69.64 |
| DN180 | 97.08 | 87.66 |
| DN200 | 136.1 | 114.7 |
| DN225 | 154.9 | 130.2 |
| DN250 | 223.5 | 185.1 |
| DN280 | 249.4 | 223.7 |
| DN315 | 333.8 | 293 |
| DN355 | 490.9 | 428 |
| DN400 | 675.3 | 547.6 |
| DN450 | 803 | 683 |
| DN500 | 1003 | 808 |
| DN560 | 1289 | 1102 |
| DN630 | 1467 | 1176 |
| DN710 | 2387 | 1538 |
| DN800 | 2762 | 1872 |
| DN900 | 3825 | 2880 |
| DN1000 | 4507 | 3472 |
| DN1200 | 7770 | 5215 |
| Flange Plate | On request |
End Cap
| Size | SDR 11 | SDR 17 |
|---|---|---|
| DN20 | 3.62 | |
| DN25 | 3.36 | |
| DN32 | 3.62 | |
| DN40 | 5.06 | |
| DN50 | 5.88 | |
| DN63 | 6.86 | |
| DN75 | 11.86 | |
| DN90 | 16.78 | 13.8 |
| DN110 | 24.72 | 20.1 |
| DN125 | 35.14 | 32.72 |
| DN140 | 43.46 | 43.46 |
| DN160 | 59.22 | 44.88 |
| DN180 | 87.96 | 82.04 |
| DN200 | 101.8 | 82.4 |
| DN225 | 129.6 | 124.4 |
| DN250 | 186.2 | 152.6 |
| DN280 | 230.5 | 214.2 |
| DN315 | 304.1 | 242.1 |
| DN355 | 399.5 | 354.2 |
| DN400 | 646.1 | 559.1 |
| DN450 | 819 | 639 |
| DN500 | 1029 | 879 |
| DN560 | 1257 | 1050 |
| DN630 | 1576 | 1327 |
Cross Tee
| Size | SDR 11 |
|---|---|
| DN63 | 42.42 |
| DN75 | 53.48 |
| DN90 | 72.54 |
Equal tees, condensate collectors and SDR 9 elbows
Butt-fusion Equal Tee
| Size | SDR 11 | SDR 17 |
|---|---|---|
| DN40x40x40 | 11.2 | |
| DN50x50x50 | 17.7 | |
| DN63x63x63 | 18.7 | |
| DN75x75x75 | 30.24 | |
| DN90x90x90 | 45.98 | 45.98 |
| DN110x110x110 | 76.7 | 76.3 |
| DN125x125x125 | 115.62 | 110.24 |
| DN140x140x140 | 136.08 | 131.58 |
| DN160x160x160 | 191 | 159.18 |
| DN180x180x180 | 239.18 | 225.42 |
| DN200x200x200 | 317.5 | 256.7 |
| DN225x225x225 | 468.8 | 444.4 |
| DN250x250x250 | 617.9 | 480.1 |
| DN280x280x280 | 846.6 | 676 |
| DN315x315x315 | 1126.3 | 880.7 |
| DN355x355x355 | 1506.9 | 1143.7 |
| DN400x400x400 | 1878 | 1387 |
| DN450x450x450 | 2727 | 2080 |
| DN500x500x500 | 3665 | 2900 |
| DN560x560x560 | 4846 | 3553 |
| DN630x630x630 | 6327 | 5041 |
| DN710x710x710 | 10109 | 7513 |
| DN800x800x800 | 15300 | 10152 |
| DN450x450x450 (long version) | 2495 | |
| DN500x500x500 (long version) | 3212 | |
| DN560x560x560 (long version) | 4316 | |
| DN630x630x630 (long version) | 5286 |
Butt-fusion 45° Elbow SDR9
| Size | SDR 11 |
|---|---|
| DN315 | 825.6 |
Condensate Collector (no return)
| Size | SDR 11 | SDR 17 |
|---|---|---|
| DN63 | 354.4 | |
| DN75 | 363.48 | |
| DN90 | 382.46 | |
| DN110 | 342.18 | |
| DN125 | 589.46 | |
| DN140 | 592.62 | |
| DN160 | 506.38 | |
| DN180 | 1077.94 | |
| DN200 | 898.4 | |
| DN225 | 1367 | |
| DN250 | 1327.6 | |
| DN280 | 1837.2 | |
| DN315 | 1903.7 | |
| DN355 | 2567 | |
| DN400 | 3218 | 2729 |
| DN500 | 4764 |
PE ball valves and valve accessories
Standard port bodies with PE fusion ends, in single vent and double vent versions. The right-hand table prices the parts that get ordered alongside them and are usually left off an enquiry until the buyer discovers they are needed: operating stems, protective sleeves, dust caps and warning tape.
Ball valves, standard and vented
Standard Ball Valve
| Size | Standard |
|---|---|
| Φ32 | 246 |
| Φ40 | 545 |
| Φ50 | 553 |
| Φ63 | 567 |
| Φ90 | 1030 |
| Φ110 | 1436 |
| Φ160 | 2979 |
| Φ200 | 4624 |
| Φ250 | 5183 |
| Φ315 | 9743 |
| Φ355 | 11354 |
Single Vent Ball Valve
| Size | Standard | With booster lever |
|---|---|---|
| Φ63 | 1250 | |
| Φ90 | 1750 | |
| Φ110 | 2055 | |
| Φ160 | 3484 | 3924 |
| Φ200 | 5380 | 6433 |
| Φ250 | 7106 | 8001 |
| Φ315 | 10825 | |
| Φ355 | 13891 |
Double Vent Ball Valve
| Size | Standard | With booster lever |
|---|---|---|
| Φ63 | 1640 | |
| Φ90 | 2174 | |
| Φ110 | 2234 | |
| Φ160 | 3722 | 4482 |
| Φ200 | 6020 | 6891 |
| Φ250 | 8521 | 9213 |
| Φ315 | 12603 | |
| Φ355 | 14372 |
Valve accessories
| Accessory | Size | Price | Unit |
|---|---|---|---|
| Warning tape | #20 general type | 1.56 | RMB/m |
| #20 with metal tracer | 2.16 | ||
| Drilling tool for straight saddle | Φ63-Φ90 | 88 | RMB/pc |
| Φ110-Φ160 | 150 | ||
| Dust cap | DN20 | 1.6 | RMB/pc |
| DN25 | 1.6 | ||
| DN32 | 1.6 | ||
| DN40 | 1.6 | ||
| DN50 | 2 | ||
| DN63 | 3 | ||
| DN90 | 5 | ||
| DN110 | 5.6 | ||
| DN160 | 6 | ||
| DN200 | 7 | ||
| DN250 | 10 | ||
| DN315 | 14 | ||
| Operating stem | Φ63 | 118.8 | RMB/pc |
| Φ90-Φ110 | 148.5 | ||
| Φ160-Φ200 | 158.4 | ||
| Φ250-Φ315 | 168.3 | ||
| Protective sleeve | Φ63 | 198 | RMB/pc |
| Φ90 | 217.8 | ||
| Φ110 | 217.8 | ||
| Φ160 | 217.8 | ||
| Φ200 | 217.8 | ||
| Φ250 | 297 | ||
| Φ315 | 297 |
Warning tape is priced per metre, everything else per piece. Extended protective sleeves are quoted on request.
Steel-plastic transition fittings
Two price columns throughout this section: Std. Price is the standard epoxy-coated steel end, 3PE Price is the three-layer polyethylene coating used where the transition will be buried without a wrapping. The difference is coating, not steel.
Straight transitions, SDR 11
Straight Steel-plastic Transition (OD) - SDR11
| Size | Std. price | 3PE price |
|---|---|---|
| *DN25/DN22 | 44.08 | 57.44 |
| *DN25/DN27 | 49.64 | 62.08 |
| *DN32/DN22 | 53.12 | 59.12 |
| *DN32/DN27 | 57.86 | 62.8 |
| DN32/DN32 | 65.86 | 71.62 |
| *DN32/DN34 | 65.86 | 74.88 |
| DN40/DN27 | 60.66 | 70.86 |
| DN40/DN32 | 67.26 | 75.96 |
| *DN40/DN34 | 67.72 | 75.96 |
| DN40/DN38 | 69 | 82.4 |
| *DN40/DN42 | 71.66 | 84.2 |
| DN40/DN45 | 75.34 | 93.54 |
| *DN40/DN48 | 75.76 | 96.32 |
| DN50/DN32 | 68.56 | 90.16 |
| *DN50/DN34 | 68.56 | 90.16 |
| DN50/DN38 | 75.4 | 95.46 |
| *DN50/DN42 | 75.6 | 97.7 |
| DN50/DN45 | 75.7 | 97.8 |
| *DN50/DN48 | 75.76 | 97.8 |
| DN50/DN51 | 79.94 | 101.76 |
| DN63/DN32 | 69.08 | 95.34 |
| *DN63/DN34 | 69.08 | 95.34 |
| DN63/DN38 | 82.22 | 113.38 |
| *DN63/DN42 | 82.76 | 104.74 |
| DN63/DN45 | 82.76 | 105.4 |
| *DN63/DN48 | 87.06 | 113.34 |
Straight Steel-plastic Transition (OD) - SDR11
| Size | Std. price | 3PE price |
|---|---|---|
| DN63/DN51 | 93.46 | 117.2 |
| DN63/DN57 | 103.04 | 132.4 |
| *DN63/DN60 | 103.04 | 132.4 |
| DN63/DN63 | 103.04 | 133.92 |
| DN75/DN76 | 179.2 | 251.6 |
| DN90/DN76 | 208.24 | 263.28 |
| *DN90/DN89 | 229.84 | 291.46 |
| DN110/DN89 | 262.24 | 326.32 |
| DN110/DN108 | 355.9 | 536.5 |
| DN110/DN114 | 369.92 | 440.8 |
| DN125/DN133 | 511.52 | 584.48 |
| DN160/DN159 | 581.28 | 719.98 |
| DN160/DN168 | 620.22 | 775.64 |
| DN180/DN159 | 628.68 | 774.72 |
| DN200/DN203 | 972.22 | 1355.88 |
| DN200/DN219 | 1027.96 | 1330.16 |
| DN225/DN219 | 1260.38 | 1497.28 |
| DN250/DN219 | 1270.5 | 1453.96 |
| DN250/DN273 | 1568.7 | 2287.94 |
| DN315/DN273 | 1782.62 | 2577.02 |
| DN315/DN299 | 1961.04 | 2849.46 |
| DN315/DN325 | 2092.46 | 3312.74 |
| DN355/DN325 | 2923 | 3380 |
| DN355/DN377 | 3461 | 3831 |
| DN400/DN426 | 4184 | 4903 |
| DN500/DN529 | 6538 | 7133 |
Straight transitions, SDR 17, and ductile-iron threaded
Straight Steel-plastic Transition (OD) - SDR17
| Size | Std. price | 3PE price |
|---|---|---|
| PE90/DN76 | 207.54 | 262.58 |
| *PE90/DN89 | 229.84 | 291.46 |
| PE110/DN89 | 262.24 | 326.06 |
| PE110/DN108 | 355.9 | 536.5 |
| PE110/DN114 | 369.92 | 440.8 |
| PE125/DN133 | 511.52 | 584.48 |
| PE160/DN159 | 567.2 | 719.98 |
| PE160/DN168 | 620.22 | 775.64 |
| PE180/DN159 | 628.68 | 774.72 |
| PE200/DN203 | 972.22 | 1355.88 |
| PE200/DN219 | 1018.32 | 1267.42 |
| PE225/DN219 | 1145.8 | 1461.38 |
| PE250/DN219 | 1195.12 | 1476.24 |
| PE250/DN273 | 1400.12 | 2287.94 |
| PE315/DN273 | 1766.68 | 2577.02 |
| PE315/DN299 | 1961.04 | 2849.46 |
| PE315/DN325 | 2092.46 | 3312.74 |
| PE355/DN325 | 2923 | 3283 |
| PE355/DN377 | 3321 | 3691 |
| PE400/DN426 | 4085 | 4797 |
| DN500/DN529 | 6346 | 6941 |
DI Threaded Steel-plastic Transition (OD) SDR11
| Size | Std. price |
|---|---|
| DN25xR3/4 | 36 |
| DN32xR1 | 49.48 |
| DN32xR3/4 | 36.08 |
| DN40xR1 | 52.4 |
| DN40xR1-1/4 | 55.02 |
| DN40xR1-1/2 | 61.84 |
| DN50xR1 | 57.28 |
| DN50xR1-1/4 | 61.4 |
| DN50xR1-1/2 | 64.86 |
| DN50xR2 | 85.4 |
| DN63xR1 | 66.3 |
| DN63xR1-1/4 | 69.9 |
| DN63xR1-1/2 | 73.66 |
| DN63xR2 | 85.4 |
Bent transitions, 1.1 m and 1.5 m steel length
Bent Steel-plastic Transition (OD) · Total steel length 1.1 m (0.3×0.8) · SDR11
| Size | Std. price | 3PE price |
|---|---|---|
| *DN25x22 | 88.5 | 158.9 |
| *DN25x27 | 101.04 | 166.72 |
| DN32x22 | 98 | 163.8 |
| *DN32x27 | 103.46 | 167 |
| DN32x32 | 123.82 | 200.9 |
| *DN32x34 | 123.82 | 200.9 |
| *DN40x27 | 108.62 | 173.48 |
| DN40x32 | 127.32 | 202.02 |
| *DN40x34 | 127.32 | 202.02 |
| DN40x38 | 144.28 | 185.2 |
| *DN40x42 | 164.34 | 234.38 |
| DN40x45 | 170.64 | 240.8 |
| *DN40x48 | 191.56 | 248.16 |
| DN50x32 | 139.48 | 230.2 |
| *DN50x34 | 139.48 | 230.2 |
| DN50x38 | 151.36 | 233 |
| *DN50x42 | 168.94 | 238.9 |
| DN50x45 | 179.72 | 243.9 |
| *DN50x48 | 193.2 | 249.64 |
| DN50x51 | 202.24 | 257.76 |
| DN63x32 | 144.66 | 239.04 |
| *DN63x34 | 144.66 | 239.04 |
| DN63x38 | 157 | 241 |
| *DN63x42 | 174.58 | 270.06 |
| DN63x45 | 182.7 | 280 |
| *DN63x48 | 195 | 298.16 |
| DN63x51 | 208.7 | 303.56 |
| DN63x57 | 213.8 | 363.96 |
| *DN63x60 | 213.8 | 363.96 |
| DN63x63 | 245 | 370 |
| *DN90x89 | 1349.82 | 1765.58 |
| *DN90x89(SDR17) | 1349.82 | 1765.58 |
| DN110x108 | 1890.3 | 2326.46 |
| DN110x108(SDR17) | 1890.3 | 2326.46 |
Bent Steel-plastic Transition (OD) · Total steel length 1.5 m (0.3×1.2) · SDR11
| Size | Std. price | 3PE price |
|---|---|---|
| *DN25x22 | 132.38 | 188.1 |
| *DN25x27 | 138.96 | 196.68 |
| DN32x22 | 133.16 | 188.74 |
| *DN32x27 | 139.76 | 197.36 |
| DN32x32 | 143.64 | 222.86 |
| *DN32x34 | 143.64 | 222.86 |
| *DN40x27 | 141.24 | 215.58 |
| DN40x32 | 144.6 | 223.84 |
| *DN40x34 | 144.6 | 223.84 |
| DN40x38 | 156.5 | 235.82 |
| *DN40x42 | 188.2 | 286.66 |
| DN40x45 | 190.44 | 304.02 |
| *DN40x48 | 217.36 | 319.12 |
| DN50x32 | 160.08 | 253.96 |
| *DN50x34 | 160.08 | 253.96 |
| DN50x38 | 170.48 | 263.26 |
| *DN50x42 | 196.88 | 295.34 |
| DN50x45 | 204.84 | 307.96 |
| *DN50x48 | 218.84 | 320.58 |
| DN50x51 | 234.58 | 337.72 |
| DN63x32 | 164.74 | 258.62 |
| *DN63x34 | 164.74 | 258.62 |
| DN63x38 | 175.56 | 273.4 |
| *DN63x42 | 201.98 | 318.64 |
| DN63x45 | 205.2 | 312.5 |
| *DN63x48 | 222.18 | 339.88 |
| DN63x51 | 245.68 | 341.2 |
| DN63x57 | 270.64 | 409.36 |
| *DN63x60 | 270.64 | 409.36 |
| DN63x63 | 280.3 | 409.36 |
| *DN90x89 | 1605.74 | 2044 |
| *DN90x89(SDR17) | 1605.74 | 2044 |
| DN110x108 | 2158.12 | 2689.32 |
| DN110x108(SDR17) | 2158.12 | 2689.32 |
Electrofusion saddle fittings, new type
The current saddle design, with the fusion zone moved away from the branch outlet so that the tapping can be made without the outlet deforming. Supplied with a plug or as a branch saddle ready for a spigot outlet.
EF Saddle Coupler (new type)
| Size | SDR 11 |
|---|---|
| DN63x20 | 28.72 |
| DN63x25 | 28.72 |
| DN63x32 | 28.72 |
| DN90x32 | 41.72 |
| DN90x63 | 58.38 |
| DN110x63 | 69.72 |
| DN160x63 | 101.62 |
| DN200x63 | 113.98 |
| DN225x63 | 124.46 |
EF Saddle Branch (new type)
| Size | SDR 11 |
|---|---|
| DN63x20 | 60.78 |
| DN63x25 | 60.78 |
| DN63x32 | 60.78 |
| DN90x20 | 63.9 |
| DN90x25 | 63.9 |
| DN90x32 | 63.9 |
| DN90x63 | 99.52 |
| DN110x20 | 86.72 |
| DN110x25 | 86.72 |
| DN110x32 | 86.72 |
| DN110x63 | 103.34 |
| DN125x20 | 86.78 |
| DN125x25 | 86.78 |
| DN125x32 | 86.78 |
| DN160x63 | 221.44 |
| DN180x32 | 149.56 |
| DN200x63 | 234.36 |
| DN225x63 | 242.46 |
How the discount works
There is no coupon and no seasonal sale. What exists is the ordinary arithmetic of a factory: a moulding run has a set-up cost, a container has a fixed freight cost, and a place in a planned production schedule costs less to the plant than an interruption to it. Those three facts are what a quotation actually reallocates.
- Quantity per size. A run of fifty DN110 couplers and a run of five thousand do not carry the same unit cost, because the set-up is spread over a different number of pieces. This is the single largest lever, and it is strongest on the sizes where the tool is small.
- Size mix. Freight is priced per container, not per piece. An order that fills a 40HQ properly - heavy fittings at the bottom, light ones above, no air - reduces the freight component per piece enough to be visible in the unit price. Our container loading calculator does that arithmetic before you ask.
- Schedule. Fittings that can be placed into a run already planned for that size are cheaper than fittings that require the machine to be changed over. A six-week horizon is usually enough to find that slot.
So the useful enquiry is not "what is your best price" but a schedule: size, quantity, standard, destination port and required date. With those five lines we can price the same list against a real production plan, and the answer will be a number you can compare with another supplier instead of a percentage without a base.
Send five lines and get a priced schedule back. Size, quantity, standard, port, date. Use the enquiry form or email julie@zjqingfa.com. If you already have a bill of materials in Excel, send it as it is - we will map it to the sizes on this sheet.
What the list does not cover
These are factory prices for the part, in RMB, per piece. Four things sit outside them and are quoted per shipment:
| Not included | Why it is separate |
|---|---|
| Freight, insurance and export documentation | Depends on the port pair, the container type and the Incoterm, none of which are properties of the fitting |
| Non-standard packing | Standard export carton and pallet are included. Crated, sealed or customer-labelled packing is a second operation |
| Third-party inspection and testing | Certificates and witness tests are bought from the inspection body per order, and their cost does not scale with the order value |
| Moulds and tooling | For sizes or configurations outside this sheet, the tool is charged once and then amortised over the run |
Two further notes. Prices are in RMB; a USD or EUR quotation is converted at the rate on the day the invoice is issued, not the day the list was published. And the list is revised when resin or steel moves enough to matter, which has historically been one to two times a year rather than monthly.
Questions buyers ask before they order
Are these prices FOB, CIF or ex-works?
They are factory prices in RMB per piece. Freight, insurance and export documentation are quoted separately once the destination port is known, because they depend on the shipment rather than the part.
Is there a minimum order quantity?
It is set per size, not per order. A DN20 coupler and a DN630 tee do not share one, and neither does a standard moulding and a made-to-order item. Send the sizes and quantities and we will confirm what can be produced together.
Can you quote in USD?
Yes. The list is maintained in RMB because that is the currency the factory buys resin in. A USD quotation is converted at the prevailing rate and usually carries a validity period of a few days rather than the months a RMB list can hold.
Why is SDR 17 cheaper than SDR 11 for the same size?
Less material and a shorter cooling cycle. The SDR 17 wall is about two thirds of the SDR 11 wall at the same diameter, so both the resin cost and the moulding time fall. It is not a lower grade of PE100.
Do the prices include test certificates?
Mill test certificates for the resin batch and dimensional inspection reports are included. Third-party inspection, witness testing and radiographic examination of fabricated tees are not.
How current is this list?
It took effect on 1 July 2026. When resin or steel moves enough to change the numbers we reissue the sheet; the date at the top of the page is always the effective date of the version you are reading.
Where to go next
If you are still working out which fitting the pipe schedule calls for, start with the gas fittings range page or the full dimensional specification. If the question is which wall class a given pressure needs, the SDR to PN converter will answer it faster than this page can. If you need the arithmetic behind the numbers on this sheet - how a pressure rating is derived from SDR, and why the gas coefficient is higher than the water one - that is in the standards comparison.
The water series has its own sheet, with the SDR 9 and socket-fusion ranges that do not appear here: HDPE water supply fittings price list 2026.
Send Inquiry














