PE100 Electrofusion Elbow

PE100 Electrofusion Elbow

Products Description PE100 Electrofusion Elbow 01. Electrofusion 90 degree Elbow I. Basic Definitions and Structure Electrical fusion fittings for 90° turning connections in HDPE pipeline systems; internally embedded spiral electric heating wires, heated by an electrical fusion welding...
Send Inquiry

90 Degree Elbow Dimension Drawing 

 PE100 Electrofusion Elbow - 90 degree elbow dimension drawingpe100-electrofusion-elbow-dimensions-sdr11-sdr17

PE100 Electrofusion Elbow - 90 and 45 Degree HDPE Elbows

The PE100 electrofusion elbow makes a turning connection in an HDPE pipeline system. Spiral electric heating wires are embedded in the fitting; when the electrofusion welding machine energises them, the interface between the fitting and the pipe melts and fuses, producing a joint whose strength is often higher than that of the pipe itself. Each elbow is injection moulded as a single piece and fitted with connection terminals for the welding leads.

Product Type

 

  • Electrofusion 90 degree elbow - for right-angle turns in HDPE pipeline systems, with embedded spiral heating wires and moulded connection terminals.
  • Electrofusion 45 degree elbow - for a gentler change of direction in urban water supply, drainage and gas infrastructure. Compared with traditional fittings the material offers excellent corrosion resistance, wear resistance and anti-ageing properties, with a service life of over 50 years.

Materials and Standards

  • Raw material: PE80 / PE100 (HDPE)
  • Pressure rating: commonly SDR11 (PN16), SDR13.6 (PN12.5), SDR17 (PN10) and SDR21 (PN6)
  • Standards: ISO 4427, ISO 4437, GB/T 13663.3 and GB/T 15558.3
  • Colour: black, suitable for both water and gas service
  • Size: 25 mm - 900 mm
  • Technique: injection moulding, round body with a smooth surface
  • Certification: ISO, KS, CE and WRAS

Key Features

  • Joint strength above the pipe - the fused interface is typically stronger than the pipe body, removing the leakage risk of mechanical joints.
  • Corrosion and wear resistance - the polyethylene body is unaffected by aggressive soil, water and chemical media.
  • Long service life - designed for over 50 years in water and gas service.
  • Compact installation - needs little working space, which suits trenches and confined layouts.

Applications

Urban water supply and drainage, gas distribution, industrial fluid transport and any HDPE pressure pipeline that requires a right-angle or 45 degree change of direction.

Customisation

OEM, ODM and OBM production is supported, and fittings carry the QF brand or a customer brand. Origin: Ningbo, Zhejiang, China.

About Zhejiang Qingfa Pipe Technology Co., Ltd.

PE / HDPE Pipe Fittings Manufacturer Since 1999

Zhejiang Qingfa Pipe Technology Co., Ltd. has specialized in the supply of PE pipe fittings for more than 25 years. From a down-to-earth start we have grown into one of the leading names in the Chinese PE pipe fitting industry, built on consistent quality, practical innovation and dependable service.

Our product range covers the complete accessory system for PE piping - for both gas fuel and water pipeline applications - including PE electrofusion fittings, butt fusion fittings, PE ball valves, PE-steel-PE valves, PE-steel transition fittings and PE cylinders, with sizes from dn20 mm to dn1200 mm.

25+Years in PE fittings
dn20–dn1200Size coverage
42 setsInjection moulding machines
10,000 tAnnual capacity

Manufacturing takes place across 42 sets of injection moulding machines, more than 40 units of CNC machining equipment, 10 sets of automatic welding machines, a central feeding system and multiple lines of automated production equipment - giving an annual production capacity of 10,000 tons. This scale, together with the most complete supporting system in the domestic industry, makes Qingfa one of the largest and most technically capable PE pipe fitting enterprises in China.

We continue to bring in experienced engineering and management talent, and our production, quality and R&D departments are staffed by senior industry experts. Quality is managed through a full 6S system and international management standards including ISO 9001, ISO 14001 and ISO 45001, with European CE and Korean KS certification, supported by a CNAS-accredited laboratory. Every batch passes incoming raw material inspection, first-article inspection by the line leader, operator self-inspection, on-site inspector checks and final finished-goods inspection before shipment.

Factory & Workshop

In-house Moulding · Machining · Assembly · Testing
Zhejiang Qingfa Pipe Technology factory gate and manufacturing base, Yuyao, Zhejiang, China

Manufacturing base at Xiaojingpu Industry Park, Hemudu Town, Yuyao - injection moulding, CNC machining and CNAS in-house testing under one roof.

Injection moulding workshop with Haitian machines producing HDPE pipe fittings

Injection moulding workshop

Automated injection moulding lines for PE electrofusion and butt fusion fittings

Automated moulding lines

Large diameter PE pipe fittings installed on site by Qingfa engineers

Large-diameter fittings on site

In-house moulding, machining, assembly and testing - from PE100 resin to finished, fully traceable fittings.

Certifications & Approvals

CE · WRAS · CNAS · ISO 9001 / 14001 / 45001 · Five-Star After-Sales
Five-star after-sales service certification GB/T 27922-2011

Five-Star After-Sales Service

The after-sales service system for our HDPE pipe fittings complies with GB/T 27922-2011 (Commodity After-sales Service Evaluation System) and has been rated at the five-star service level.

CE certification 1 issued by ECM Italy NB1282 for HDPE pipe fittings

CE Certification (Gas & Water)

Issued by ECM - Ente Certificazione Macchine, Italy (EU Notified Body NB1282). Our HDPE fittings for gas and water systems, DN20–DN400, comply with BS EN 1555-3:2021 and BS EN 12201-3:2024, meeting EU market access requirements.

CE certification 2 ECM voluntary certification for PE pipe fittings DN20-DN1200

CE Certification (Construction Products)

ECM voluntary certification covering PE pipe fittings, DN20–DN1200, under EN 12201-3:2024 and EN 1555-3:2021, in line with the Construction Products Regulation (EU) No 305/2011.

CNAS laboratory accreditation ISO/IEC 17025:2017 for Qingfa testing centre

CNAS Laboratory Accreditation

Our testing centre is accredited by CNAS (China National Accreditation Service for Conformity Assessment) to ISO/IEC 17025:2017, confirming technical competence for the testing and calibration services listed in the accreditation scope.

ISO 14001 environmental management system certification

ISO 14001 Environmental Management

Environmental management for the production and servicing of PE pipe fittings and PE ball valves complies with GB/T 24001-2016 / ISO 14001:2015. Issued by China Economic Certification.

ISO 45001 occupational health and safety management system certification

ISO 45001 Occupational Health & Safety

The occupational health and safety management system for the production and servicing of PE pipe fittings and PE ball valves complies with GB/T 45001-2020 / ISO 45001:2018. Issued by Zhongjing Certification.

ISO 9001 quality management system certification

ISO 9001 Quality Management

The quality management system for the production and servicing of PE pipe fittings and PE ball valves complies with GB/T 19001-2016 / ISO 9001:2015. Issued by Zhongjing Certification.

WRAS material approval for drinking water contact BS6920-1:2014

WRAS Approval (UK Drinking Water)

Material Approval under WRAS - the UK authority for products in contact with drinking water. Our PE100 black HDPE fittings comply with BS 6920-1:2014 and are suitable for drinking water up to 65°C, without affecting taste, appearance or water quality.

Certificates shown are issued to Zhejiang Qingfa Pipe Technology Co., Ltd. Scan copies are available on request for tender and pre-qualification submissions.

Manufacturing & Quality Capability

Capacity · Equipment · Inspection · Traceability
Full range, one source Electrofusion, butt fusion, valves and transition fittings - dn20 to dn1200 from a single supplier, so you do not have to split a project across factories.
42 injection moulding machines Plus 40+ CNC units and 10 automatic welding machines, with a central feeding system and automated production lines.
10,000 tons annual capacity Capacity to support both repeat distribution orders and large project supply programmes.
CNAS-accredited laboratory In-house testing to ISO/IEC 17025:2017 - dimensional, pressure and material testing without sending samples out.
Five-stage quality control Incoming raw material inspection, first-article check, operator self-inspection, on-site inspector review and finished-goods inspection.
Full material traceability From resin batch through to the finished part, supported by mill certificates and test reports issued with each shipment.
CE, WRAS, KS and ISO certified Approvals covering EU market access, UK drinking water contact, Korean KS and international management systems.
Custom & standard options Flange drilling to DIN/EN, ANSI or JIS, plus non-standard sizes and configurations on request.
Export experience Supplying distributors, contractors and utilities across Europe, the Middle East, Africa, Southeast Asia and beyond.

Contact Zhejiang Qingfa Pipe Technology Co., Ltd.

Tell us your pipe size, SDR and pressure class and we will confirm availability, lead time and price.

Fax 0086-574-62952223
Add Xiaojingpu Industry Park, Hemudu Town, Yuyao, Zhejiang, China

Electrofusion 45 Degree Elbow, dn25 to dn400

The 45 degree electrofusion elbow is pressed from the same PE100 body as the square version and shares its socket geometry, differing only in the angle of the bore. Both are welded with the standard control box, so the choice between the two is made on the drawing, by the angle the line has to turn. The schedule below runs from dn25 to dn400 and prints the wall series available at each size.

SizeSDR SeriesSizeSDR SeriesSizeSDR SeriesSizeSDR Series
dn2511dn12511dn3211dn16011
dn4011dn20011dn5011dn22511
dn6311dn25011dn7511dn31511
dn9011dn35511dn11011dn40011

Two points are worth carrying to the order. The heavy series is pressed at every size in the band, so an SDR11 elbow can always be supplied whatever the diameter. The lighter series is not: it appears only in the two largest sizes, which means a line specified in SDR17 will generally turn with an electrofusion elbow up to dn315 and either step up to SDR11 or use a butt fusion bend above that point. Where a size shows a single series, the other mould was not cut for it, and the diameter is still produced in the series that is listed. The square version of the same body is on the HDPE electrofusion 45 degree equal elbow page, and the specifications page lists the family as a whole.

As the factory behind this PE100 Electrofusion Elbow, Qingfa Industry controls mould design, injection and final inspection in one place in Yuyao, Ningbo, China. See how our PE fittings are made.

Elbow dimensions: the full electrofusion elbow dimension chart gives the outside diameter, leg length L1 and centre-to-end L for SDR11 dn25 to dn630 and SDR17 dn110 to dn900, with the tolerance on every size.

Hot Tags: PE100 Electrofusion Elbow, PE100 Electrofusion Elbow dn20-dn1200, PE100 Electrofusion Elbow SDR11/SDR13.6/SDR17/SDR21, PE100 Electrofusion Elbow dn20-dn1200 SDR11/SDR13.6/SDR17/SDR21, PE100 pe100 electrofusion elbow, pe100 electrofusion elbow supplier, HDPE End Cap, End Cap HDPE Pipe, End Cap HDPE, PE PiPE End Cap, Electrofusion Test Cap, HDPE PiPE End Cap

Send Inquiry