Hdpe Ball Valve Manufacturer

Hdpe Ball Valve Manufacturer

Products Description hdpe ball valve We are the professional hdpe ball valve manufacturer. This high-density polyethylene PE ball valve is produced by a new type of national standard HDPE raw material through a one-time injection molding process. It is divided into three categories: ordinary...
Send Inquiry

 

HDPE Ball Valve Manufacturer

pe-gas-double-vent-ball-valve-style1

 

 

HDPE Ball Valve - PE100 Valve for Gas and Water Lines

This high-density polyethylene PE ball valve is moulded in a single injection process from new national-standard HDPE raw material. It splits into three categories - the ordinary straight-through ball valve, the buried valve with release and extended rod, and the double release and extended rod ball valve - covering underground laying of PE gas pipelines and municipal water supply pipelines. It is a key control fitting for urban gas transmission and distribution and for rural water supply and drainage networks.

Product Type

  • Standard PE ball valve - no extended rod; the body is fully integrated and both ends are hot-melt socket welded to PE pipe. Normally used in shallow trenches and for sectional opening and closing of indoor pipework.
  • Single diffusion ball valve - top extended operating rod plus a single-side release valve, so it can be installed deep underground with the handle reaching the surface. It allows single-sided pressure relief and discharge, and is a common model on gas mains.
  • Double diffusion ball valve - release valves and extended transmission rods on both sides, a standard product for gas mains and municipal main pipes. Fixed supports hold the assembly, and after burial the stem reaches the ground so the valve can be operated without excavation.

Specifications

  • Diameter: DN40, DN50, DN63, DN90, DN110, DN160, DN200, DN225, DN250, DN315, DN355
  • Connection: butt fusion, electrofusion or hot-melt socket
  • Application: gas and water service
  • Standards: GB 15558.3 and ISO 4437
  • Working temperature: -20 degrees C to 40 degrees C
  • Certification: ISO 9001:2015, CE and SGS

Applications

Underground PE gas pipelines, municipal water supply pipelines, urban gas transmission and distribution and rural water supply and drainage networks.

Our Factory

Qingfa focuses on the research and manufacturing of PE gas and water supply pipe fittings. Main products include electric fusion pipe fittings, hot fusion pipe fittings, ball valves and steel-plastic conversion joints, with specifications from DN20 to DN1200 and more than 3,000 varieties to cover the industry's scenarios. The company has invested in more than 40 advanced injection moulding machines, over 50 high-precision CNC processing units and automated welding production lines.

Ball Valve Variants Compared by Size

Three body variants are moulded in the fusion ball valve family, and the difference between them is not in the bore but in what the body carries: the plain valve, the single-vent body used for purging a line before commissioning, and the double-vent body used where the line has to be drained from both sides of the ball. All three share the same PE100 body and the same fusion sockets, so a line that uses more than one variant does not change bore at the valve. The coverage of each is set out below.

SizePlain bodySingle vent bodyDouble vent body
Ø32Standard head--
Ø40Standard head--
Ø50Standard head--
Ø63Standard headStandard headStandard head
Ø90Standard headStandard headStandard head
Ø110Standard headStandard headStandard head
Ø160Standard headStandard + boosterStandard + booster
Ø200Standard headStandard + boosterStandard + booster
Ø250Standard headStandard + boosterStandard + booster
Ø315Standard headBooster onlyBooster only
Ø355Standard headBooster onlyBooster only

Two readings follow from the table. The plain and vented bodies cover the middle of the size range on a standard head and hand over to a geared booster at the top, where the opening torque of a valve of that bore is more than a bar should be asked to carry. And the two vented bodies cover the same sizes as each other, so a line that needs different vent arrangements in different chambers can mix them without changing bore at any point. On a valve that will be buried, the stem is extended to bring the head up to a box and the body is marked accordingly. The single-vent variant in detail is on the HDPE fusion ball valve page and the wider range on the specifications page.

Looking for a dependable supplier of Hdpe Ball Valve Manufacturer? Qingfa Industry has been manufacturing PE100 pipe fittings since 1999, in its own moulds in Yuyao, Ningbo. Read about our manufacturing capability.

Hot Tags: Hdpe Ball Valve Manufacturer, Hdpe Ball Valve Manufacturer dn40-dn355, PE100 hdpe ball valve manufacturer, hdpe ball valve manufacturer supplier, 12 Inch HDPE Electrofusion Cap, Electrofusion End Cap Fitting, Electrofusion Test End Cap, HDPE Cap, HDPE Electrofusion Cap, PE PiPE End Cap

Previous:No Information

Send Inquiry